ADT® Authorized Dealer Serving Napa Valley, Petaluma & Sonoma County
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Napa Residence

Homeowners must safeguard against various risks like burglary, fire, and flooding. But what about a risk that can’t be detected by human senses? Carbon monoxide is different from other risks as you may never be aware that it’s there. Nevertheless, using CO detectors can effectively shield your loved ones and property. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Napa property.

What Is Carbon Monoxide?

Referred to as the silent killer because of its absence of color, taste, or odor, carbon monoxide is a common gas formed by the incomplete combustion of fuels. Any appliance that utilizes fuels like a furnace or fireplace may generate carbon monoxide. While you normally won’t have a problem, issues can arise when equipment is not regularly serviced or adequately vented. These oversights could cause a build-up of the potentially lethal gas in your interior. Generators and heating appliances are the most consistent reasons for CO poisoning.

When subjected to lower concentrations of CO, you may notice fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to high concentrations could lead to cardiopulmonary arrest, and potentially death.

Tips On Where To Place Napa Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, get one today. If possible, you ought to use one on every floor, and that includes basements. Here are several suggestions on where to place carbon monoxide detectors in Napa:

  • Place them on each level, particularly in places where you utilize fuel-burning appliances, such as furnaces, gas dryers, fireplaces, and water heaters.
  • You ought to always install one within 10 feet of bedroom areas. If you only get one carbon monoxide detector, this is where it should go.
  • Place them approximately 10 to 20 feet from potential CO sources.
  • Avoid installing them right above or next to fuel-burning appliances, as a small degree of carbon monoxide might be discharged when they turn on and prompt a false alarm.
  • Fasten them to walls about five feet from the floor so they will test air where occupants are breathing it.
  • Avoid installing them in dead-air areas and near doors or windows.
  • Place one in spaces above garages.

Check your CO detectors routinely and maintain them according to manufacturer guidelines. You will generally have to switch them out within five or six years. You should also make certain any fuel-consuming appliances are in in good working order and adequately vented.